WY580 · 4-Channel Vehicle Video Recorder
A four-channel video terminal for trucks, buses and construction vehicles, with simultaneous 1080P recording, 4G video transmission, multi-constellation positioning and single-SD-card storage; search recordings by channel, recording type or alarm event
Discuss this modelKey features
- Supports AHD, TVI, CVI, IPC and CVBS video signals, with simultaneous recording of four 1080P channels for different vehicle cameras.
- A single SD card up to 512 GB, bad-sector detection and an encrypted file system; a built-in supercapacitor reduces the risk of recording-file damage during unexpected power loss.
- Built-in 4G with GPS, BeiDou and GLONASS positioning for uploading video, location and alarm events; positioning-antenna fault detection and stationary-drift suppression.
Functions in detail
Audio/video recording and local preview
- Four audio inputs and one audio output, with H.265/H.264 video encoding and PAL/NTSC formats.
- Connect a local monitor by VGA or CVBS; horizontal and vertical image mirroring are supported.
- Reversing-image distance assistance, with configurable recording resolution and quality.
Recording search and backup
- Search by channel, recording type or alarm event; local synchronous playback of four channels.
- Back up recordings using the SD card or a USB flash drive connected to the USB port.
- Storage use varies with resolution, encoding settings and scene content.
Location reporting and alarm linkage
- Report latitude, longitude and speed; transmit video, location and alarm events over 4G.
- Four alarm inputs with configurable positive/negative triggers and AD acquisition; one open-drain alarm output shared with IO.
- Detect ACC ignition; alarms can trigger recording and mark the associated files.
Device operation and maintenance
- Separate user and administrator password levels, with a graphical menu operated by USB mouse.
- Local USB updates and automatic or manual remote updates over 4G.
- Undervoltage, short-circuit and reverse-polarity protection; automatic shutdown at low voltage and low-power standby after ignition-off.
Technical specifications
| Parameter | Specification |
|---|---|
| Dimensions | 140 mm × 118 mm × 31 mm |
| Processor / system | SSR910Q; embedded Linux |
| Storage | Single SD card, up to 512 GB; encrypted file system; supercapacitor protection |
| Video inputs | 4 channels, 1080P; mixed AHD/TVI/CVI/CVBS/IPC inputs; aviation connectors |
| Video encoding | H.265 / H.264 |
| Recording resolution | 1080P / 720P / 960H / D1 / CIF; 16 recording-quality levels |
| Audio/video outputs | VGA + CVBS; 1 synchronized audio/video output |
| Audio | 4 inputs, 1 output; G711A/G711U/G726/MG726 |
| Reference recording storage use | 1080P: 1.45 GB/hour/channel; 720P: 510 MB/hour/channel, depending on encoding and scene content |
| Positioning | GPS / BeiDou / GLONASS; antenna connection and short-circuit detection; GNSS drift suppression |
| 4G network | FDD-LTE / TDD-LTE |
| Alarm interfaces | 4 configurable positive/negative alarm inputs; 1 open-drain output shared with IO |
| Ignition detection | 1 ACC input |
| Serial port | 1 RS232 debug port |
| USB | USB2.0; mouse operation, USB-drive backup and firmware updates |
| Power output | 5 V 300 mA |
| Power consumption | Standby current 3 mA; average power 5.6 W |
| Indicators / storage protection | PWR/RUN/SD/ALM indicators; mechanical SD-card lock |
Installation and configuration
Check the vehicle power supply, mounting position, camera signals, connectors and SD card before installation. Configure ACC and alarm inputs, recording quality and the SIM/local network. Storage figures are reference values that vary with encoding and scene content; match the connected software and accessories to the actual version.